30
16 -
Resetting the receiver
Simply connect your VCR to the VCR SCART on the receiver.
To record a digital channel, the receiver must be switched on the channel you wish to record.
Start the recording on the AV channel of the VCR (0, AV, EXT,...). Refer to your VCRʼs User
Guide to check how to proceed.
To view a video recording, simply start playing the tape. The VCR should take over the receiver.
Should this not happen, press the TV/VCR key on the remote control of your VCR.
@
Note: These instructions also apply to DVD recorders.
17 -
Using the receiver with a VCR
This procedure allows to recover the factory settings, as well as the factory channel list. To reset
the unit, proceed as follows :
• Put the receiver on the channel you want to record
• Go to MENU /
System Information / Factory Reset
• On the
Reset
line, select
No
with
34
arrows
• Go on the
Start
line and press OK.
The receiver will come to its original settings, you are promted to select language, as for the
first installation.
The volume may vary from one channel to another. It may therefore be necessary to rectify
the volume level difference.
• Press twice on
. The
Volume Offset
menu appears in the top left corner of the
screen.
• Use the vol
3
and vol
4
keys to adjust the volume level, to match other channels.
• Press OK to confirm your selection.
18 -
Adjusting the volume
