21
• Go in MENU /
Installation / Program
Satellite
• On the
Current Antenna
line, select with
34
arrows the number that makes the cor-
rect satellite appear on the
Satellite Name
line.
• On the
TP
line, press OK to show the TP list
window (Freq, Pol, SR)
• With
34
and
56
arrows, select the rele-
vant TP. If the TP is not listed, you must add it
as explained in the next section.
• Press OK and check that the signal is correct
(
Signal Quality
>50%). Should the opposite
occur, you will have to check again the technical parameters, or check the DiSEqC settings
in the LNB setup menu.
• On the
Search Type
line, select
TP
with
34
arrows.
• On the
FTA/CAS type
line, select
FTA
with
34
arrows.
• Go to the
Search Current ANT
line and press OK. The
Search channels
window appears,
and the newly found channels are listed and stored.
• Press OK and then EXIT to quit the menus.
C - Automatic channel shearch
• Go in MENU /
Installation / Program Satellite.
• On the
Current Antenna
line, select with
34
arrows the number of the first satellite declared
(generally, 1).
• On the
Search Type
line, select All with
34
arrows.
• On the
FTA/CAS type
line, select
FTA
with
34
arrows.
• Go to the
Search All ANT
line and press
OK. The
Search channels
window appears,
and the newly found channels are listed and
sotred.
• Press OK and then EXIT to quit the menus.
@
Note: the automatic search scans the channels using the TP list associated with each
satellite. If the automatic search doesn’t find a channel, though you are sure it exists, it
is probably because you need first to update the TP list.
