Metronic 441360, Руководство пользователя

Страница: 13 / 36

13
Connect the cables and the leads as indicated on the figure below (figure n°4). It is useful to
know on which inputs of the switch the heads Astra and Hotbird are connected. If you do not
know it and the installation is difficult to reach, test the 2 possible combinations :
Astra on Port B and HotBird on A or Astra on A and HotBird on B.
To program your receiver, go to the paragraph 3 page 11, installation of a Bi-head satellite dish
Astra 19,2° + Hot Bird.
Caution: you should not alter the satellite dish adjustments or the switch, it is
only necessary to program your digital receiver.
The receiver being disconnected from the mains, connect directly the LNB to the LNB receiver
input (A). Connect a scart lead from the television to the receiver TV output scart socket. Switch
on the television, connect the receiver on the power supply. Press the power key (
) of the
remote control, the green LED lights on.
Check in the list of the pre programmed channels at the end of the user manual. You can select
and watch the channel of this satellite.
4 - Connection to an already installed dish
5 - Connection on a dual-head system Astra + Hotbird already aligned
DiSEqC 1.0 or Tone Burst
switch
Rear
DualstreamBOX
Coaxial cable
Scart cable