Metrologic ScanPal 2, Руководство пользователя, Страница: 17 / 33

Program Mode
This is the default operating mode when the ScanPal l 2 is powered up. It depends
on the user program loaded into the Program module .
The application interpreter and its inventory application, loaded by default,
displays the following main menu:
The counter, located in the bottom right-hand corner of the screen, displays the
number of records collected.
1. Collect data
Data collection starts after confirmation of the Collect data operation, using the
, key.
A new screen displays the following two prompts:
Item:
Qty: 1
The
Item (Article) prompt expects an item code, read by the scanner or entered
on the keypad and confirmed by the key.
The
Qty ( Quantity ) prompt offers, by default, a quantity of 1, which can be
modified by entering on the keypad the new quantity desired. This is confirmed
using the key. The data collected are then recorded and the two
prompts are displayed again.
Pressing the key allows a return to the main menu.
1.Collect data
2.Upload data
3.Utilities
JUN 16, 13:30 00000
(R)
ESC