Metrologic MS7820 Solaris Скачать руководство пользователя

Страница: 49 / 64

PGRADING THE

IRMWARE

The MS7820 is part of Metrologic's line of scanners with flash upgradeable
firmware. The upgrade process requires, a new firmware file supplied to the
customer by a customer service representative and Metrologic's MetroSet

software

. A personal computer running Windows 95 or greater with an

available RS232 serial or USB port is required to complete the upgrade.

PowerLink Cable #54-54014 is required when using RS232 for the
upgrade process. This cable can be ordered from Metrologic at
1-800-ID-METRO.

Do not

use the standard cable supplied with

keyboard wedge or RS485 scanner interface kits. If using USB for the
upgrade process, the standard USB cable provided with the scanner
can be used.

To upgrade the firmware in the MS7580:

1. Plug the scanner into a serial communication port on the host system.

2. Start the MetroSet

software

3. Click on the plus sign (+) next to

POS Scanners

to expand the supported

scanner list.

4. Choose the MS7820 Solaris from the list.

5. Click on the

Configure Solaris/7820 Scanner

button.

6. Choose

Flash Utility

from the options list located on the left side of the

screen.

7. Click on the

Open File

button in the Flash Utility window.

8. Locate and open the flash upgrade file supplied by Metrologic.

9. Select the COM port that the scanner is connected to on the host system.

10. Verify the settings listed in the Flash Utility window.

11. Click on the

Flash Scanner

button to begin the flash upgrade.

12. A message will appear on the screen when the upgrade is complete.

Metrologic's customer service department can be reached at
1-800-ID-METRO or 1-800-436-3876.

MetroSet

is available for download, at no additional cost, from

http://www.metrologic.com/corporate/download.

Содержание MS7820 Solaris

































































Результаты поиска

Содержание MS7820 Solaris

Отзывы:

Похожие инструкции для MS7820 Solaris

Бренды по названию

Популярные бренды

Metrologic MS7820 Solaris, Руководство пользователя

Результаты поиска

Содержание MS7820 Solaris

Отзывы:

Похожие инструкции для MS7820 Solaris

Бренды по названию

Популярные бренды