Metrologic MK9520-37A38, Инструкция по установке и эксплуатации

Страница: 12 / 56

8
I
NSTALLING THE
S
CANNER TO THE
H
OST
S
YSTEM
RS485 ”
1. Turn off the host system.
2. Plug the male 10-pin RJ45 end of the
MVC cable into the 10-pin socket on
the scanner. You will hear a ‘click’
when the connection is made.
3. Connect the other end of the MVC
cable to the host device.
4. Turn on the host system.
Plugging the scanner into a port on the host system does not guarantee
that scanned information will be communicated properly to the host
system. Please refer to the MetroSelect Single-Line Configuration
Guide or MetroSet
2 ’s help files for instructions on changing the
scanner’s factory default configuration. The scanner and host system
must use the same communication protocols.
See caution on page 6.
”
Applicable for IBM
®
host applications.
Figure 7.