Metrologic IS1000 Series, Инструкция по установке и эксплуатации

Страница: 37 / 44

IS1000 – Installation and User’s Guide
31
9. TROUBLESHOOTING GUIDE
Symptoms Possible Causes Solution
Not connected or bad connection Check all connections
Battery low Charge the battery
Radio base power connector
faulty
Replace the 12V power supply
No power supply
No power supply from the terminal
Check the power supply from the
terminal
Laser window dirty Clean the laser window
Battery low Charge the battery
Bar code damaged or poor quality Check the bar code quality
No scan or scan faulty
The laser reader does not
recognize the bar code read
Set the parameters of the new
symbology and check that the
reader recognizes the bar code
Laser reader not “linked” with
radio base
Set up communication between
the laser reader and radio base by
scanning the radio base ID bar
code on the radio base with the
reader
Radio interference Change the radio channel
Battery low Charge the battery
The interface cable connecting
radio base to host is not correctly
connected
Check the connections
Communication failure
between IS1000 and host
The host is not identified.
The connection ID does not
correspond to your application
Check the connection ID in the list
of connections
The battery charger is not
supplied
Connect the battery charger
Laser reader does not
charge
The laser reader is not correctly
connected to the battery charger
Check the charging contacts