Insert a new module for the Multi Autolab Cabinet
Figure 13 - Installing the final three M101 or M204 modules into the Multi Autolab Cabinet
5.
Optional modules cannot be installed in Parent positions.
6.
Optional modules cannot be installed in a Daughter position to the right of an empty
Parent position.
4.3
– Installation procedure for optional modules into Multi Autolab Cabinet
The Multi Autolab Cabinet can accommodate the following optional modules into a
Daughter position:
•
pX1000
•
MUX
•
EQCM
•
BA
•
FRA32M
The optional modules can only be installed in Daughter positions and only if the Parent
position immediately to the left of this Daughter position is occupied by a M101 or M204
module.
Figure 14 – [INCORRECT SITUATION] Installation of an optional module into a Multi Autolab Cabinet
12 |
P a g e
