manualshive.com logo in svg

Metrohm 863, Руководство пользователя

Поделиться
Скачать
Metrohm 863 Скачать руководство пользователя страница 9

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

1 Introduction

863 Compact Autosampler

￭￭￭￭￭￭￭￭

1

1  Introduction

1.1 

Instrument description

The 863 Compact Autosampler is an Autosampler for ion chromatography
or voltammetry with a wide variety of applications. It can be used as the
central control instrument in an independent automation system or as an
integrated sample changer in a PC-controlled automation system.

1.1.1 

Model versions

The 863 Compact Autosampler is available in two model versions with dif-
ferent accessories.

863 Compact IC Autosampler 2.863.0010

With ion chromatography accessories.

863 Compact VA Autosampler 2.863.0020

With voltammetry accessories.

1.1.2 

Instrument components

The 863 Compact Autosampler has the following components:

￭

Turntable

Permanently mounted sample rack with 36 positions for sample ves-
sels.

￭

Lift with lift head

With needle holder for PEEK needles.

￭

Single channel peristaltic pump

For transporting sample solutions.

￭

USB (OTG) connector

For connecting a computer, a printer, or a USB flash drive (for system
backup or method export).

￭

Remote connector

For connecting instruments with a remote connector.

1.1.3 

PC-controlled operation

If the 863 Compact Autosampler is controlled via a USB connection using
the 

MagIC Net

 computer software, then any automation runs can be

programmed. This allows optimal use of the instrument components
which the instrument has available. The software can actuate the instru-
ment components directly and can use them more flexibly.

Содержание 863















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды