manualshive.com logo in svg

Metrohm 863, Руководство пользователя

Поделиться
Скачать
Metrohm 863 Скачать руководство пользователя страница 14

1.3 Safety instructions

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

6

￭￭￭￭￭￭￭￭

863 Compact Autosampler

1.3.5 

Flammable solvents and chemicals

WARNING

All relevant safety measures are to be observed when working with
flammable solvents and chemicals.

￭

Set up the instrument in a well-ventilated location (e.g. fume cup-
board).

￭

Keep all sources of flame far from the workplace.

￭

Clean up spilled liquids and solids immediately.

￭

Follow the safety instructions of the chemical manufacturer.

1.3.6 

Danger from biological substances

If the instrument is used for biological hazardous substances, it must be
marked in accordance with regulations.

In case of a return shipment to Metrohm or a Metrohm Service partner,
the instrument or component has to be decontaminated and the hazard
symbol for biological hazardous substances must be removed. A declara-
tion of decontamination must be enclosed.

WARNING

Danger of infection and poisoning from biological hazardous substan-
ces

Poisoning from toxins and/or infections from samples contaminated
with microorganisms.

￭

Wear protective equipment.

￭

Use exhaust equipment when working with vaporizing hazardous
substances.

￭

Dispose of biologically contaminated substances properly.

1.3.7 

Recycling and disposal

This product is covered by European Directive 2012/19/EU, WEEE – Waste
Electrical and Electronic Equipment.

The correct disposal of your old instrument will help to prevent negative
effects on the environment and public health.

More details about the disposal of your old instrument can be obtained
from your local authorities, from waste disposal companies or from your
local dealer.

Содержание 863















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды