￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 Installation
2.850.9010 IC Conductivity Detector
￭￭￭￭￭￭￭￭
13
2.5
Connecting the instrument to the power grid
WARNING
Electric shock from electrical potential
Risk of injury by touching live components or through moisture on live
parts.
￭
Never open the housing of the instrument while the power cord is
still connected.
￭
Protect live parts (e.g. power supply unit, power cord, connection
sockets) against moisture.
￭
Unplug the power plug immediately if you suspect that moisture has
gotten inside the instrument.
￭
Only personnel who have been issued Metrohm qualifications may
perform service and repair work on electrical and electronic parts.
Connecting the power cord
Accessories
Power cord with the following specifications:
￭
Length: max. 2 m
￭
Number of cores: 3, with protective conductor
￭
Instrument plug: IEC 60320 type C13
￭
Conductor cross-section 3x min. 0.75 mm
2
/ 18 AWG
￭
Power plug:
– according to customer requirement (6.2122.XX0)
– min. 10 A
NOTICE
Do not use a not permitted power cord!
1 Plugging in the power cord
￭
Plug the power cord into the instrument's power socket.
￭
Connect the power cord to the power grid.
Содержание 2.850.9010
Страница 1: ...IC Professional Detector IC Conductivity Detector Manual 8 850 8057EN 2019 09 23...
Страница 2: ......
Страница 6: ...Table of contents IV 2 850 9010 IC Conductivity Detector 7 Accessories 19 Index 20...
Страница 8: ......
