Metrohm 2.850.9010, Руководство пользователя

Страница: 17 / 28

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 Installation
2.850.9010 IC Conductivity Detector
￭￭￭￭￭￭￭￭
9
NOTICE
With the instruments of the 850 Professional line of instruments, up to
two detectors can be placed and connected.
Placing the detector in the instrument
1 Removing the knurled screws
￭
Unscrew knurled screws on the rear panel.
￭
Optional with 850 instruments : Remove the handle if it is still fas-
tened to the instrument.
2 Removing rear panel
￭
Remove rear panel.
3 Positioning the detector
￭
Put the detector through the opening and position it on the sup-
port surface intended for this purpose and slide it as far as the
limit stop to the front.
4 Replacing rear panel
￭
Insert the detector cable in a cable feed-through on the rear
panel.
￭
Place the detector outlet capillary in a suitable capillary feed-
through.
￭
Replacing the rear panel.
The detector cable (3- 1 ) and the detector outlet capillary (3- 2 )
should freely hang out of the cable or capillary feed-through.
5 Tightening the knurled screws
￭
Optional with 850 instruments : Reattach the handle higher up
and use it as a holder for MPaks.
￭
Tighten the knurled screws.