Radiance 10/100 Mbps Services Line Card
74
SNMPv3 traps.
Example
:
Console> set trapdestination 192.168.1.100 port 9162 version 3
username v3user
Console>
set username
Description
: Set the username, password, and access for user login.
Syntax
:
set username <user name> password <user password>
access <user | admin | root>
Parameters
: user name – a case-sensitive ASCII string up to 32
characters in length.
user password – a case-sensitive ASCII string up to 32
characters in length.
access – specifies the access level for a user login.
user – read-only access to non-privileged objects.
admin – read-write access to non-privileged objects.
root – full read-write access to all objects.
Example
:
Console> set username guest password guest access user
Console>
set uservlan
Description
: Set the user VLAN ID on one or more ports. (The R821
requires both ports to be set to the same user VLAN(s).)
The user VLAN ID must be different from any previously
provisioned management VLAN ID(s). Up to 16 user VLAN
IDs are supported.
Syntax
:
set uservlan <vlan id> port <port number[untag] ... [port
number n]>
Parameters
: vlan id – VLAN ID in the range 1 to 4094.
port number – the port number to which the user VLAN is
assigned.
untag – remove the specified uservlan tag from frames
that egress the access port. Untagging is not allowed
on the trunk port. Untagging is only applicable in
IEEE 802.1Q mode.
Example
:
Console> set uservlan 22 port 1untag 2
Console> set uservlan 23 port 1 2
Console>
Содержание R821-1S
Страница 8: ...Radiance 10 100 Mbps Services Line Card 6...
Страница 14: ...Radiance 10 100 Mbps Services Line Card 12...
Страница 118: ...Radiance 10 100 Mbps Services Line Card 116...
Страница 126: ...Radiance 10 100 Mbps Services Line Card 124...
