Master Hub Configuration & Console Management 83
Group Last Changed:
The value of system uptime since any of
the following conditions occurred:
•
hub cold or warm-started
•
this instance of group was created (such as, when a device
or module was added to the system)
•
a change in the value of hub operational status
•
ports were added or removed as members of the group
(such as, group admin. enabled or disabled)
•
any of the counters associated with this hub that have
been reset.
Group Partitioned Ports:
The total number of partitioned ports
in the group.
Group Operational Status
•
Operational: The hub is connected to the stack.
•
Not Present: The hub is not present.
Group Control
Lists the configurable functions and provides option fields. Use Ctrl + S
to toggle between options.
Group Admin State: Allows you to isolate one or both
segments from the other hubs in a CenturyStack. When a
segment is disabled, the segment cannot repeat to the other hubs
in the stack. The default value is Enabled 10Mbps and
100Mbps.
•
Enable 10-100 (Default):
Both 10Mbps and 100Mbps
segments of a given hub are connected to the backplane of
the stack. This is the default.
•
Disable 10-100: Both 10Mbps and 100Mbps segments of
the hub are isolated from the stack.
•
Enable 10: Only the 10Mbps segment of a given group is
connected to the backplane of the stack. The 100 Mbps
segment of a given group is isolated from the stack.
•
Enable 100: Only the 100Mbps segment of a given group is
connected to the backplane of the stack. The 10Mbps
segment of a given group is isolated from the stack.
