manualshive.com logo in svg

METRObility Optical Systems CenturyStack 8112-01-M, Инструкция по установке и эксплуатации

Поделиться
Скачать
METRObility Optical Systems CenturyStack 8112-01-M Скачать руководство пользователя страница 102

102

CenturyStack 8100 Managed Hub

Relative

Repeater Port Statistics Information Menu (Relative)

Display Mode:  Relative counters represent the values collected
since the relative mode was selected. Absolute values represent
the value collected since system start.

Group Number:  The ID number of a hub in the stack. (1 to 6)

Port Number:  Port number of selected group. (1 to 12/24)

Display Mode:  Display counters in Absolute or Relative values.

Readable Frames:

 Total readable frames received by the port.

Broadcast Packets:

 The total number of good packets received

which were directed to a broadcast address. Note that this does
not include multicast packets.

Multicast Packets:

 The total number of good packets received

which were directed to a multicast address. Note that this
number does not include packets directed to the broadcast address.

Содержание CenturyStack 8112-01-M





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды