METRO PROFESSIONAL GCV1100, Инструкция по эксплуатации

Страница: 16 / 138

- 15 -
GB
Problem Possible cause Solution
Appliance
does not
achieve
required
temperature.
Thermostat
is not set
correctly.
Set temperature
with thermostat
as described in
this manual.
Appliance is
located near
heat sources.
Move appliance
well away from
heat sources.
Appliance is
placed too near
to the wall or to
other objects.
Keep a minimum
distance of 10cm.
Doors are not
closed properly
or opened and
closed too
often.
Close the doors.
Keep them closed
for a while.
Seals are
damaged.
Have seals
checked by a
specialist.
Appliance
overloaded,
filled with warm/
hot foodstuffs
or filled in a way
that prevents
proper air
circulation.
Remove several
items, remove
warm/hot
foodstuffs or
reorder contents
of appliance
to allow air
circulation. Make
sure that the air
inlet and outlet are
not blocked.
Appliance
was filled
before it had
reached the set
temperature.
Remove contents
from appliance.
Let appliance
reach the set
temperature, then
refill it.
Appliance is
very noisy.
Appliance is
placed too near
to the wall or to
other objects.
Keep a minimum
distance of 10cm.
Appliance not
in a stable
position.
Place the
appliance on
an even and
stable surface.
Adjust the feet, if
necessary.
There are loose
parts in the
appliance.
Have appliance
checked by a
specialist.
Shifting
content inside
appliance.
Reorder contents
inside the
appliance.
Condensation
on outside of
appliance.
Normal
phenomenon
in humid
environments.
Wipe appliance
with a dry and
soft cloth.
Murmur of
water during
operation.
Normal sound of refrigerant
circulating in the system.
Storage
• Before storing, remove all foodstuffs from the
appliance, disconnect it from the supply and clean
the appliance and its accessories thoroughly.
• Store the appliance in a dry, protected
environment at room temperature and out of the
reach of children.
• Keep the appliance’s doors open to avoid smell
or mold.
• To protect the appliance from dust, cover it
with a cloth that allows air circulation inside the
appliance.
4. Troubleshooting
WARNING!
• In case of failures or malfunctions, always unplug
the appliance immediately.
• This appliance does not contain any parts that
can be repaired or serviced by the consumer.
Only perform the steps described in this
instruction manual! All further inspection,
maintenance and repair work must be performed
by an authorized service center or a similarly
qualified specialist.
• When any information is shown on the LED
display that is not described in these instructions,
wait until the appliance’s temperature is shown on
the LED display again or set the power switch to
O to avoid damage to the appliance.
• Should you require spare parts, always obtain
them from an authorized seller. Do not use
spare parts that are not recommended by the
manufacturer!
Problem Possible cause Solution
Appliance
does not
operate.
Power plug not
connected to
electrical outlet.
Connect power
plug tightly with a
suitable electrical
outlet.
Supply cord is
damaged.
Have supply cord
replaced by the
manufacturer, its
service agent or
similarly qualified
persons.
Other electrical
defect to the
appliance.
Have appliance
checked by a
specialist.