M2
Page 4
The manufacturer is not responsible for mistakes that could be found in this
handbook and also for direct or indirect damage resulting from the equipment, its
performances and the use of this product.
CLEANING
Use a soft cotton cloth slightly soaked with an ethyl alcohol based product.
DO NOT USE
the following products: acetone, benzene, toluene and halogens
hydrocarbons.
3.
INTRODUCTION
3.1. PRODUCT PRESENTATION
The M2 digital readout allows dimensional control using 1 or 2 probes.
It is possible to make simple measurement (with one probe), or combined
measurement (with 2 probes) : sums or differences
Measurements are made in comparison with a reference part: the master.
The M2 can be connected to a PC thanks to its RS232 connection.
A footswitch can be connected in order to transfer measurements.
3.2. PROBES
The following probes can be connected :
-
Heidenhain Specto TTL
: measuring range 12 and 30mm, resolution 0.5µm
or 1µm
-
Heidenhain MT TTL
: measuring range 12 and 25mm, resolution 0.1µm
-
(1) Mitutoyo LG series
, measuring range 10 to 50mm, resolution from 0.1 to
1µm
(1) Needs an adaptor for the connection.
3.3. CHARACTERISTICS
TFT colour display 4,3’’, resolution 480x272.
Static measurements
Analogue or digital display
2 measurement configurations (2 characteristics)
Possibility to select automatically the characteristic by moving a probe or by
pressing a key.
Relative or absolute display by pressing a key
Measuring direction inversion by pressing a key
Display resolution (from 1 to 5 decimals)
Metric or Imperial (Inches) measurement
RS232 port for communication with a PC
Measurement transfer by pressing a key, footswitch input or retro-command on
the RS232 port.
Temporary measurements stop.
