Metrix HX0102, Руководство пользователя

Страница: 33 / 104

Oscilloscope current probe
Chapter II
33
3.2.1. INST MODE (AC AND DC OUTPUT)
With the DC zero adjusted to within ±3mA, probe motionless.
Zero measurement error due to RMS noise:
Parameter Value
Resolution 3mA
Intrinsic error on amplitude (DC or sine wave) ± 1.5% ± 3mA
Intrinsic error on phase at 3A and 50Hz < 0,5°
3.2.2. RMS MODE (DC OUTPUT)
With the DC zero adjusted to within ±3mA (or ±0.3mV) in “INST” mode, probe motionless.
Parameter Value
Resolution 5mA
Intrinsic error on amplitude (DC or sine wave) ± 2% ± 30mA
3.2.3. OVERSHOOT OF RANGE
The red LED lights to indicate an overshoot of the range when the output voltage is above approximately
+2.2V DC or below -2.2V DC or peak.
3.2.4. MAINS ADAPTER
Parameter Value
Input voltage Mains voltage: 230 V
ac
, 50 Hz
Input current 30mA
ac
Output voltage 9V
dc
Output current 150mA
dc