Metric Halo ULN-2, Быстрый старт

Страница: 7 / 12

Mobile I/O ULN-2
Quick Start Guide
7
Figure 1.4: Console window
There are a few important things to look at here. To the right, the “System” column lets you set the clock
source, sample rate and whether the wordclock output is 1x or 256x rate. In the “Lock” column you can see
if the ULN-2 is receiving a valid clock on the selected source.
Toward the top of the window you will see the text “ULN-2/xxx” where “xxx” is the serial number of the box.
By clicking on this you will get a menu of options for removal of offline boxes (you shouldn’t have any at
this point).
The I/O Control tab has metering for the analog and digital I/O. If you click on the +DSP tab, you have access
to a “Virtual” DSP area. Next is the “Recording” tab. Any channel that is assigned to a “FW” channel via a
direct out or bus output is available for recording via MIO Console’s record engine. Since the template you
loaded has these assignments made, they are shown here. More detailed instructions on the Record Panel are
available in the documentation.