Interface Description
Icon
Name
DC Power Input
AC Power Input
Power switch
VGA
HDMI
Ethernet WAN/LAN
USB
Audio Input
A-IN
A-OUT
Alarm-IN
Alarm-OUT
RS485
RS232
Audio Output
Alarm In
Alarm Out
RS485
RS232
NVR Illustration
1.
It is recommended that you use only the included power supply.
2.
You should reset the device administrator password (the system default username is
"admin" and the password is "12345") when booting for the first time. To ensure the security of the
device, please save the admin login password and modify it regularly.
Modify Password
Step 1: After the device is powered on, select the system language, click "Apply", enter the
password, click "Login", click "Modify".
Step 2: Enter the new password and confirm password, tick off the "Unlock Pattem" to draw twice the
consistent unlock pattern consisting of 4-9 points.
PoE NVR rear panel
Non-PoE NVR rear panel
NVR rear panel interface is similar with pictures above, but the product appearance, including buttons,
interfaces and layout are for reference only and may differ from the product you have purchased.
Local Basic Operation
Boot Up
Make sure the input voltage matches the NVR consumption. Connect the device to the monitor and to the power
adapter (if available). Plug in the power, switch on the power button (if available), then the device will boot up.
NOTE:
