7
REV. 2/25/22 INSTBC-DSPL-HD2
BC-9715 HARNESS INSTALLATION
1.
Unplug the OE radio connector and
install the
BC-9715 t-harness.
BC-9715 t-Harness
BC-9715 t-Harness
OE Connector removed from radio
OE Connector removed from radio
2.
The installation of the pre-wired harness is designed to work with multiple styles of aftermarket amplifiers with different
types of inputs and outputs. Both
input (white connectors)
and
output (black connectors)
wires on the
BC-9715 harness
use
Molex
terminals that are pre-crimped onto the speaker leads; loose
Molex
connectors are included to allow the user to pin the
connectors accordingly.
If the amplifier uses
Molex Micro Fit connectors
for the inputs and outputs, simply match the amplifier’s speaker configuration
and plug them in using the provided connectors.
If the amp uses
RCA inputs
, pre-terminated
Molex connectors
with
RCAs
already wired are provided. The option to hardwire the
speaker inputs and outputs would be the final option.
3.
To get battery power and ground wires up the backbone of the motorcycle use
Saddle Tramp’s BC-9703 harness
. (Sold
separately)
TIP:
If you have pinned the Molex Micro fit connector improperly. You will need to use a Pin Extraction tool. (See page 20 for
Troubleshooting tips)
