4
386.257.1187
|
REFLASHING THE OE RADIO
BC-DSPL-HD2
• Reflashes the OE radio curve to a flat response
• Water Tight Saddle Tramp Case
• 15 Band graphic equalizer or 5 Band parametric EQ per channel
• Pre-wired for quick installation when retaining the OE radio
• BC-9715 harness with pre-wired inputs and outputs
• Independent equalization for all outputs
• Independent crossover for all outputs
• Selectable slope (12, 24, 36, or 48db per octave)
• Signal Delay
• Settings are adjusted using the AXXESS DSP XL app on Android devices ONLY
• Read, write, and store configurations for future recall
• Password protect feature available in the mobile app
• USB Micro-B updatable
Product Information:
The Saddle Tramp
DSP is a device that allows a user to flash
the Harley-Davidson
®
radio to a 4-channel,
flat audio output curve; but when the
device is connected, it locks itself to the
vehicle’s identification number (VIN),
saving the last known state of the radio
into memory. In order to unlock the
Saddle Tramp DSP and use it on a different
vehicle, or return it, you must remove the
flash from the motorcycle, returning the
radio back to factory settings. This can
only be done 3 times in total. In the event
that this product needs to be returned to
the manufacturer, it cannot be locked to a
motorcycle’s VIN.
BC-9715 Harness
• Add an amp harness 2014-up HD with OE radio and fairing
• Provides pre-terminated input and output wires
• RCA output harnesses included
• Pre-wired rear speaker output, used with BC-9720 backbone harness (sold separately)
• Universal for all amps
• Wire covered in protective cloth tape
Reflashing the OE Radio
Stock non-amplified Harley Davidson’s radios use pre-programmed crossover and equalization
settings that are locked into the OE radio. These setting can’t be adjusted without
reflashing
your OE radio. Within the Vehicle Selection page of the
AX-DSP-XL
app you can
reflash
your OE
radio to output a flat frequency response curve.
