Metra Electronics AT-807HD Скачать руководство пользователя страница 14

Страница: 14 / 32

Accord 1998-2002, Odyssey

1999-2004:
1.

Remove the metal DIN sleeve from

the aftermarket radio.

Slide the sleeve into the

radio

housing

and secure by bending the

metal locking tabs down. (Figure A)

Slide the radio into the sleeve until

secure. (Figure A)

Locate the factory wiring harness

and antenna connector in the

dash. Metra recommends using

the proper mating adapter from

Metra or AXXESS. Re-connect the

negative battery terminal and test

the radio for proper operation.

Reassemble the dash in reverse

order of disassembly.

(Figure A)

DIN radio provision with pocket

Accord 1990-1997, Civic 1999-2000,

CL 1997-1999, CRV 1997-2002,

Integra 1990-2001, Legend 1990-

1996, Oasis 1996-1999, Odyssey

1995-1998, Prelude 1989-2001, RSX

2002-2006, TL 1996-1998, Vigor

1992-1994:
1.

Remove the metal DIN sleeve from

the aftermarket radio.

Slide the sleeve into the

radio

housing

and secure by bending the

metal locking tabs down. (Figure A)

Slide the radio into the sleeve until

secure. (Figure A)

Locate the factory wiring harness

and antenna connector in the dash.

Metra recommends using the proper

mating adapter from Metra or

AXXESS. Re-connect the negative

battery terminal and test the radio

for proper operation.

Reassemble the dash in reverse

order of disassembly.

**For Honda Accord 1994-1997

and CL 1997-1999:

Mount the rear support bracket to

the rear support provision with (2)

bolts previously removed in the dash

disassembly.

**For Honda RSX 2002-2006:

Mount the rear support bracket to

the rear support provision with (2)

#8 x ¾” Phillips screws included.

(Figure A)

99-7898

Kit Assembly

Содержание AT-807HD

































Результаты поиска

Содержание AT-807HD

Отзывы:

Похожие инструкции для AT-807HD

Бренды по названию

Популярные бренды

Metra Electronics AT-807HD, Руководство по установке

Результаты поиска

Содержание AT-807HD

Отзывы:

Похожие инструкции для AT-807HD

Бренды по названию

Популярные бренды