11
1.
Lower the glove box assembly.
2.
Remove (2) Phillips screws exposed
on the right side of the underdash.
3.
Remove (2) Phillips screws from the
driver’s side knee bolster and (1)
Phillips screw in the coin pocket.
4.
Remove (5) Phillips screws from the
underdash panel and remove the
panel. (Figure A)
5.
Remove (4) Phillips screws from the
cupholder assembly and remove.
6.
Remove (2) Phillips screws
securing the factory radio and
disconnect the wiring.
7.
Cut and remove all of the mounting
clips on the radio housing EXCEPT clips
“D” and “H” (the clips can be identified
by the stamped letter on the back of
the housing, near each clip). (Figure B)
Continue to kit assembly
Honda Odyssey 1995-1998
Isuzu Oasis 1996-1999
(Figure A)
(Figure B)
“H”
“H”
“D”
“D”
1.
Unclip the radio trim bezel
(including the climate control panel
and remove). (Figure A)
2.
Remove (4) Phillips screws
securing the factory radio and
disconnect the wiring.
3.
Cut and remove the mounting clips
from the radio housing.
4.
From the mounting brackets cut
and remove tabs “A” (the clips can
be identified by the stamped letter
on the back of the housing, near
each clip). (Figure B)
5.
Secure the brackets to the housing
with (4) #8 x 3/8” Phillips pan head
screws. (Figure B)
Continue to kit assembly
Honda Odyssey 1999-2004
(without NAV)
(Figure B)
(Figure A)
“A”
99-7898
Dash Disassembly
