99-7607B KIT ASSEMBLY
B
C
A
DOUBLE DIN/STACKED ISO UNITS RADIO PROVISION
Snap the Double DIN brackets to the
inside edge of the radio housing.
(Figure B)
3
2
Slide the Double DIN radio into the
bracket/trim plate assembly and
secure the radio to the assembly
using the screws supplied with the
radio.
(Figure C)
4
Reassemble dash in reverse order of
disassembly.
6
5
*
Note: Refer also to the instructions included with the aftermarket radio.
Cut and remove the center bar from
the radio housing.
(Figure A)
1
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
Snap the Double DIN trim-plate onto
the housing/radio assembly.
(Figure C)
METRA ACCESSORIES
STEREO DASH KITS
