99-3010S-LC
®
4
DIN radio provision with pocket
1.
Remove the metal DIN sleeve from
the aftermarket radio.
2.
Slide the sleeve into the
radio
housing
and secure by bending the
metal locking tabs down. (Figure A)
3.
Snap the
into the bottom
opening of the
radio housing
.
(Figure B)
4.
Slide the radio back into the sleeve
until it clicks in. (Figure B)
5.
Continue to Axxess Interface
Installation, and once completed,
reassemble the dash in reverse
order of disassembly using the
99-3010S-LC
radio trim panel
instead of the factory panel.
Kit Assembly
(Figure A)
(Figure B)
ISO DIN radio provision with pocket
1.
Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
2.
Mount the
ISO brackets
to the
radio with the screws supplied
with the radio. (Figure A)
3.
Snap the
into the bottom
opening of the
radio housing
.
(Figure B)
4.
Slide the radio into the radio
opening until the side clips engage.
(Figure B)
5.
Snap the
ISO trim plate
into the
radio housing
. (Figure C)
6.
Continue to Axxess Interface
Installation, and once completed,
reassemble the dash in reverse
order of disassembly using the
99-3010S-LC
radio trim panel
instead of the factory panel.
(Figure B)
(Figure A)
(Figure C)