16
Kit Preparation
1.
Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
2.
Attach the factory mounting
brackets and the 95-8202 double
DIN trim plates to the double DIN
radio with the screws supplied
with the unit. (Figure B)
NOTE: Remove locating
pins from factory brackets
with grinder.
4.
Reassemble dash in reverse order
of disassembly.
Double DIN radio provision
(Figure A)
NOTE: For all Scion TC and XA you
will need to cut off the front upper
section of the Double DIN trim
plates, as shown by dotted lines
labeled “A” in (Figure A).
For the 2001-2005 Toyota Rav4,
2001-2007 Toyota Highlander,
2003-2006 Toyota Tundra and
2003-2007 Toyota Sequoia you will
need to cut off the rear section
of the double DIN trim plates, as
shown by dotted lines labeled “B” in
(Figure A).
For all other vehicles
skip to Step 1.
(Figure A)
A
A
B
B
Kit Assembly 95-8202
Factory
brackets may differ
Содержание 95-8202
Страница 18: ...18 Notes ...
Страница 19: ...19 Notes ...
