Metra Electronics 108-FD3B, Руководство по установке

Страница: 5 / 16

REV. 8/28/2019 INST108-FD3B
5
KIT ASSEMBLY
Note: For steps 1 and 2, reference the
installation manual provided with the radio for
which hardware to use. The display screen and
radio chassis use two different types of screws.
1. Secure the radio brackets to the radio
chassis using (4) screws supplied with
the radio. (Figure A)
2. Secure the radio display to the radio
brackets using (4) screws supplied with
the radio. (Figure B)
3.
Locate the factory wiring harness and
antenna connector in the dash. Metra
recommends using the proper mating
adapter from Metra or AXXESS. Complete
all connections to the radio, then test
the radio for proper operation.
4. Slide the completed radio assembly into
the dash and secure using the
factory screws.
5.
Connect all harnessing and clip in in the
radio trim panel to the vehicle, then
reassemble the dash in reverse order of
disassembly to complete the installation.
(Figure A) (Figure B)