Metos Icerobot, Инструкция по установке и эксплуатации

Страница: 10 / 15

5HY
8VHLQVWUXFWLRQV
4
8VHLQVWUXFWLRQV
%HIRUHXVH
Before operating the appliance ensure that:
• the appliance is provided with a plug
Other liquids or items may not be present in the hopper or in the crushed ice container, as
they can cause damage to the appliance.
6ZLWFKHV
8VH
Push the power switch (1) to position “1”. The signal lamp goes on and the appliance is
ready for use.
If the lamp does not light, check the power supply.
The ice can be crushed into different size granules by regulating and fixing the knob (3)
which is located on the inside of the front opening.
Check that the crushed ice container is placed inside the appliance.
Load the ice cubes into the hopper and close the cover.
Press the workingswitch (2) on the front panel until the loaded ice is crushed.
If the appliance does not operate after pressing the switch, check that the hopper cover
and the front panel are well closed and try again. If the appliance still does not operate,
switch off the appliance and call for service.
Press the power switch to position “0” after using.
1. Powerswitch
2. Workingswitch
3. Granule size regulating knob