Metos FUTURA RP4, Инструкция по установке и эксплуатации

Страница: 14 / 43

7.5.2009 Rev. 4.0
Installation
8
In order to make eventual future service easier and increase safety, a mains switch must
be installed near the appliance. This switch must disconnect the appliance completely
from the electrical supply network.
The cable gland for the supply cable is located on the rear wall of the oven (right lower
corner). In order to make the connection, the right side panel must be removed.
5.5 Test-run
Acquaint yourself with the user manual of this appliance before testing it. The appliances
under the cooking top are provided with their own manuals.
After connecting the cable check the function of the range.
Check that
• every cooking plate heats up and the corresponding pilot light turns on when the
plate is switched on with the power regulator
• no wires inside the appliance get jammed before refitting the outer panels.
Refit the outer panels.