|
27
EDITION 003 2042
METOS PROXY ELECTRIC PASTA-COOKER
15 TROUBLESHOOTING
ELECTRIC PASTA COOKER
The appliance does not heat.
Possible causes:
• Defective heating element.
• Defective temperature regulator .
Heating cannot be adjusted..
Possible causes:
• Defective heating element.
• Defective temperature regulator .
Instructions for cleaning
REMINDERS FOR CLEANING
The manufacturer will not be liable for any damage or in-
jury resulting from failure to observe the following rules.
• Disconnect the appliance electrical power supply, if present,
before proceeding with any operation.
• Clean the satin
fi
nish stainless steel exterior surfaces, the
cooking wells and the surface of the hotplates every day.
• At least twice a year, have an authorized technician clean the
internal parts of the appliance.
• Do not use direct or high pressure water jets or steam clean-
ers to clean the appliance.
• Do not use corrosive products to clean the
fl
oor or shelf be-
neath the appliance.
SATIN FINISH STAINLESS STEEL SURFACES
• Clean the surfaces with a cloth or sponge using water and
proprietary non-abrasive detergents. Follow the grain of the
satin
fi
nish. Rinse repeatedly and dry thoroughly.
• Do not use pan scourers or other iron items.
• Do not use chemical products containing chlorine.
• Do not use sharp objects which might scratch and damage
the surfaces.
COOKING WELLS
• Clean the wells by bringing the water to the boil, with the ad-
dition of grease remover detergent if necessary.
• Remove any limescale deposits with a proprietary limescale
remover
Instructions for maintenance
REMINDERS FOR THE MAINTENANCE TECHNICIAN
The manufacturer will not be liable for any damage or injury
resulting from failure to observe the following rules.
• Read this manual carefully. It provides important information
for safe installation, use and maintenance of the appliance.
• Disconnect the appliance electrical power supply, if present,
before proceeding with any operation.
• Installation, conversion to a di
ff
erent type of gas and appli-
ance maintenance must be carried out by quali
fi
ed techni-
cians authorized by the manufacturer, in compliance with
current safety standards and the instructions given in this
manual.
• Identify the speci
fi
c appliance model. The model number is
detailed on the packaging and on the appliance data plate.
• The appliance must be installed in a well-ventilated room.
• Do not obstruct any air vents or drains present on the appli-
ance.
• Do not tamper with appliance components
COMMISSIONING
Following installation or any maintenance operations, check
appliance operation. In the event of any malfunction, consult
the next paragraph “Troubleshooting”.
ELECTRICAL APPLIANCES
Switch on the appliance as directed in the instructions and re-
minders for use given in Chapter “INSTRUCTIONS FOR USE”
and check:
• The current values of each phase.
• The correct operation of the heating elements.
Содержание 74EPCM
Страница 28: ...www metos com...
