17.05.2014
METOS CD
9
5.4. Installation
The appliance is supplied with adjustable legs. Mount the appliance with the help of the adjustable
legs in a horizontal position as accurately as possible, ensuring that the appliance rests evenly on
all legs. If adjustment is not performed with great care, the door and locks may not work properly.
It is not possible to adjust an appliance fitted with wheels.
Units intended for marine use are welded in place or bolted from the mounting holes of the adjustable
legs to the deck.
5.4.1. Condenser air circulation
Ensure sufficient air inlet/air circulation for the condenser.
The display should not be installed in a place where external air flow disturbs the display’s
air circulation. Disturbance can be caused, for example, by
• positioning of ventilation equipment heat sources that radiate or blow warm air towards
the display’s front section (not either should these be located near the display ends)
.
If a refrigerated display is installed in a serving line, care should be taken that there is no
air gap between the unit and the tray slide, through which warm air could get into the
unit’s cooling air circulation (item A).
Make sure that the condenser air inlet is not blocked and that warm air can freely exit
through the front section (and cannot get back into the unit).
Condenser air circulation
