17.05.2014
METOS CD
11
Key Combinations
To lock or unlock the keyboard
To enter in programming mode
To return to room temperature display
Symbols and significations
On
Compressore enabled
Flashing
Anti short cycle delay enabled (AC parameter)
On
Defrost in progress
Flashing
Dripping in progress
On
Measurement unit
Flashing
Programming mode
On
Measurement unit
Flashing
Programming mode
6.1.1. Locking and unlocking the keyboard
To lock the Keyboard
1. Keep UP and DOWN keys pressed for more than 3s.
2. The “oFF” message will be displayed and the keyboard will be locked. If any key is pressed more
than 3s the “OF” message will be displayed.
To unlock the Keyboard
Keep UP and DOWN keys pressed together for more than 3s the and keys till the “ON” message will
be displayed.
6.1.2. To see the set temperature
• Push and immediately release the SET key, the set point will be showed;
• Push and immediately release the SET key or wait about 5s to return to normal visualisation.
6.1.3. To change the temperature setting
• Push the SET key for more than 2 seconds, release and push again to change the Set point value;
• The value of the set point will be displayed and the “°C” or ”F” LED starts blinking;
• To change the Set value push the UP or DOWN arrows within 10s.
• To memorise the new set point value push the SET key again or wait 10s.
6.1.4. To start the Manual Defrosting
• Push the DEF key for more than 2 seconds and a manual defrost will start