Metos 4040340, Инструкция по установке и эксплуатации

Страница: 22 / 29

Rev. 01 - 11/2022
55
TYPE OF ERROR VISUALIZZAZIONE A DISPLAY
None (continuous display of the probe PB1 temperature)
Probe PB1 error (continuous display of “Er1”). If probe PB2
temperature is displayed, cyclic display in succession of “Er1”
and probe PB2 temperature
Probe PB2, PB3 and PB4 error (e.g. probe PB3 error: cyclic
display in succession of “Er3”-”40”)
Error of two probes, one of which is PB1 (e.g. probe PB1 and
PB3 error: cyclic display in succession of “Er3”-”Er1”)
Error of two probes, excluding PB1 (e.g. probe PB2 and PB3
error: cyclic display in succession of “Er3”-”40”-”Er2”-”40”)
Error of three probes, one of which is PB1 (e.g. probe PB1, PB2
and PB3 error: cyclic display in succession of “Er1”-”Er3”-”Er1”-
”Er2”)
Error of three probes, excluding PB1 (probe PB2, PB3 and
PB4 error: cyclic display in succession of “Er2”-”40”-”Er3”-”40”-
”Er4”-”40”)
Open door, with P 1 = 1 (continuous display of “dOr”;
each time the SET key is pressed, “40” or “dOr” is displayed
alternately.)
Open pressure switch with P27 different to 0 and alarm events
count less than P27 (flashing display of “PrS”; every time the
SET key is pressed “40” or “PrS” are displayed alternately)
Open pressure switch with P27 different to 0 and alarm
events count equal to P27 (continuous display of “PrS”)
ALARM
The following table summarizes the different display views depending on the alarms that occur, if the display shows the PB1 probe
temperature. The vewing on the display of the probe PB1 temperature is equal to 40°C.