Metos 2021066, Руководство пользователя

Страница: 4 / 12

3
2.3 Electrical connection
2.3.1 Note
1. Ensure that the supply voltage corresponds with the voltage marked on the rating label.
2. The machine must be CORRECTLY EARTHED .
3. Only a competent electrician may connect the electrical supply to the machine and carry
out electrical servicing work.
4. Ensure that the electrical supply has been properly disconnected (the power cable is
unplugged) before any electrical connections are made, or maintenance work is carried
out.
2.3.2 Direction of rotation
Before using the machine, check the direction of rotation of the blades. The correct direction of
rotation is showed in picture 1. If the direction of rotation is incorrect, ask an authorized
electrician to change it. The circuit diagram of the machine is to be found in Annex 3.
Picture 1. Correct direction of rotation.