Meto mn-4, Руководство по эксплуатации, Страница: 23 / 61

mn-4203
21
4.4.2 Menu Items and Values
The table below lists all the menu items and their possible values in the ‘Printer
Setup Procedure’.
Item#
(Flashes)
Item Name Description Possible Values
1 Media Type Sets printing for either direct
thermal or thermal transfer
stock. *DIRECT THERMAL
THERMAL TRANSFER
2 Sensor Type Select the sensor type that
matches your label stock. *EDGE: (Gaps in media)
( REFL ) REFLECTIVE: (Black
stripes)
( CONT ) CONTINUOUS: (No
sensing)
3
Present
Sensor Enables/Disables optional
Present Sensor *NO or YES
4 Cutter
Equipped Enables/Disables optional
Cutter *NO or YES
5
SOP Adjust Allows fine-tuning of the
starting print position on
each label. 0 – 255; default = *128
0 = close to edge
255 = furthest from edge
6 Present
Adjust Adjusts the present distance. 0 – 255; default = *128
0 = close to edge
255 = furthest from edge
7 Baud Rate Serial port baud rate. 600 to 38.4k; default = *9600
8
Data, Parity Data word length and parity. *8,N or 7,E
9 Control
Codes Allows code selection listed
in Programmer’s manual. ( STD ) *STANDARD CODES
( ALT ) ALTERNATE CODES
10 CONT.
Form Length Sets label length for
continuous media. 0 – 9999; default = *100
11
OOS
MAXVOLT Sets the sensor reading that
can indicate OOS, (out of
stock condition). 0 – 16; default = *2
Units: 0.1 volt
12 TOF Gain Sets TOF Gain value. 0 – 15; default = *10
13 TOF Delta Sets minimum change in the
sensor reading required to
recognize a “Gap” or Mark”. 0 – 50; default = *10
Units: 0.1 volt
14
TOF Low Sets the minimum sensor
reading for paper (EDGE) or
mark (Reflective). 0 – 50; default = *0
Units: 0.1 volt
15 Label Width Sets the label width. 75 – 410; default = *410
16 Scalable
Font Cache Sets the number of 1K
blocks allocated for scaleable
fonts. 0 – 128; default = *64
17
Internal
Module Sets the number of 1K
blocks allocated for the
internal RAM module. 0 – 128; default = *128
* = Default Setting