283915
Issue: N
P age 2 of 2
Warranty
Warranty
Warranty
Warranty
Methven warrants this product against manufacturing defects and that it is suitable for use under operating
conditions specified in this instruction sheet.
For your warranty, please refer to
www.methven.com
or call Customer Service
New Zealand
Australia
USA
UK
0800 804 222
1300 638 483
800 975 5409
0800 195 1602
Aerator Installations
Aerator Installations
Aerator Installations
Aerator Installations
Ceramic Cartridge Adjustment
Ceramic Cartridge Adjustment
Ceramic Cartridge Adjustment
Ceramic Cartridge Adjustment
Do not remove the ceramic cartridge from the mixer while carrying out the following adjustments.
NOTE: The cartridge is fitted to supply maximum hot supply.
Flow Adjustment
Flow Adjustment
Flow Adjustment
Flow Adjustment
Remove the indicator for the lever handle
by carefully popping out with a small flat
screw driver.
Using a 2.5mm hex key, loosen the grub
screw through the indicator hole in the
handle.
Pull the handle off the mixer.
Insert a 1.5mm hex key into the hole in the
top of the cartridge lever. Engage the grub
screw at the bottom of the hole.
Turn the key clockwise to reduce the
maximum flow setting or anticlockwise to
increase the maximum flow setting.
Reverse instructions to re-assemble.
Tempe
Tempe
Tempe
Temperature Adjustment
rature Adjustment
rature Adjustment
rature Adjustment
Remove the indicator for the lever handle
by carefully popping out with a small flat
screw driver.
Using a 2.5mm hex key, loosen the grub
screw through the indicator hole in the
handle.
Pull the handle off the mixer.
With a small screw driver carefully pry the
red Temperature limiting ring from its
locator.
Turn the Temperature limiting ring
clockwise (+) to increase maximum hot
temperature, anti-clockwise (-) to reduce
the maximum hot temperature.
Replace the adjustment ring in the locator
and push firmly to secure. The raised
portion of the ring with the +/- markings
should be to the front of the faucet.
Reverse instructions to re-assemble.
