7
To replace the battery
1.
Turn off the meter and disconnect the test leads from live circuits.
2.
Loosen the screw on the case bottom.
3.
Lift the end of the case bottom nearest the input test leads until it
unsnaps from the case top. Replace the battery cover and tighten the
screw. Recycle the battery using approved methods.
4.
Replace the battery. Observe battery polarities with positive (+) faces up
(towards the case bottom). Replace the case bottom, and ensure that
the snap on the case top (near the LCD side) is engaged.
5.
Replace and tighten the screw.
XW
WARNING
To avoid electrical shock, disconnect test leads from live
circuits before opening the case. Do not operate with open
case.
Limited Warranty and Limitation of Liability
Your Meterman product will be free from defects in material and
workmanship for 1 year from the date of purchase. This warranty does not
cover fuses, disposable batteries or damage from accident, neglect, misuse,
alteration, contamination, or abnormal conditions of operation or handling.
Resellers are not authorized to extend any other warranty on Meterman’s
behalf. To obtain service during the warranty period, return the product with
proof of purchase to an authorized Meterman Test Tools Service Center or
to a Meterman dealer or distributor. See Repair Section for details. THIS
WARRANTY IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES -
WHETHER EXPRESS, IMPLIED OR STAUTORY - INCLUDING IMPLIED
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR
MERCHANTABILITY, ARE HEREBY DISCLAIMED. MANUFACTURER SHALL
NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR
THEORY. Since some states or countries do not allow the exclusion or
limitation of an implied warranty or of incidental or consequential damages,
this limitation of liability may not apply to you.
