6
Additional Features
HOLD and 30 ms MAX HOLD Modes
HOLD mode freezes the display for later viewing. Press the HOLD button
momentarily to activate or to exit the Hold feature.
MAX mode captures voltage signals that have durations as short as 30 ms
(milliseconds) within a single range, and has automatic up range capability.
This feature is available in V dc and V ac functions. Press the HOLD button
for 1 second or more to activate or exit MAX mode.
XW
WARNING
Hazardous voltages present at test leads may not be
displayed when in HOLD mode.
Auto-ranging
If the function selected has more than one range, the meter will auto-range
to the best range and resolution.
Product Maintenance
Maintenance
Do not attempt to repair this meter. It contains no user serviceable parts.
Repair or servicing should only be performed by qualified personnel.
Cleaning
Periodically wipe the case with a damp cloth and mild detergent; do not use
abrasives or solvents. If the meter is not to be used for periods of longer
than 60 days, remove the battery and store it separately
Troubleshooting
If the instrument fails to operate, check battery, leads, and replace as
necessary. Double check operating procedure as described earlier in this
manual. Refer to the LIMITED WARRANTY section for obtaining warranty or
repairing service.
Battery Replacement
If the meter starts up with persistent resetting display or with low battery
icon
N
turns on, replace the battery. The meter uses one 3 V coin battery,
IEC-CR2032.
