ITCR Base Radio User's Guide
© 2011 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential
2
Do Not Distribute
9/8/2011
1.3
Chassis
Base radios are housed in electrically sealed metal cases. The Base radio fits within a
standard 19” rack mount and has a maximum depth of 24 inches and a height rack
of 4 RUs, weighing less than 25 lbs.
It contains a fan with a temperature sensor that can be set to turn on at a
configurable temperature.
All input/output ports are grounded and/or shielded. In addition, best engineering
practices have been employed with respect to internal shielding, unit assembly and
PCB design in an effort to minimize potential sources of unwanted radiated
emissions.
1.4
Ports and Ethernet Connectors
The Base radio supports two RJ45 Ethernet I/O ports, each on its own network.
1.5
Power Connectors
The Base radio has two studs (marked ‘+’ and ‘-‘) to support the connection of power
cables. See input power requirements further below.
1.6
Antenna Connectors
The Base radio supports N-type connectors for narrowband RF antenna(s). The
connector marked TX/RX should be routed to the transmit antenna. The connectors
marked RX1 and RX2 are provided for optional use of separate receiving antennas.
