Lighting instructions Meteor 6+1
MANUAL IGNITION
TURNING OFF THE GRILL
Turn all control valves to the
“Off” position, then switch off the gas
supply at the bottle.
Wait until the barbecue is sufficiently cool
before closing its hood.
NEVER DOUSE THE GRILL
WITH WATER WHEN THE
SURFACES ARE HOT.
If the grill will not light using the
normal lighter, use the following
procedure for manual lighting.
Use a long match or lighter.
Follow step 1-3
(Lighting instruction).
Place the match/lighter close to
one of the burners.
Do not bend over the grill.
Turn the control to the relevant
burner to full power.
Light the rest of the burners by
turning on the burner alongside
that lit to fullpower. Light one
burner at a time.
Follow step 7-8.
IF THE GRILL WILL NOT LIGHT USING
NORMAL OR MANUAL LIGHTING,
REFER TO THE TIPS SECTION IN THE
TROUBLESHOOTING MANUAL, OR
CONTACT YOUR DEALER.
!
Flames should be blue
and stable. If the flames are
large and yellow, flaring or
’broken’, check the
troubleshooting manual.
1
Always open the barbecue hood before lighting.
2
Open the gas supply valve on the gas bottle or
regulator.
3
From the OFF position, push in the control
knob of the burner you wish to light, and turn
it to the high position.
4
Push and hold the igniter button in the control
panel for 4 to 5 seconds to light the burner.
5
If burner fails to light, turn the knob to the off
position and shut off the gas supply.
Wait 5 minutes, then reattempt from step 2.
6
Light any of the remaining burners in any
order, as needed. Confirm each burner is alight
before igniting another burner.
7
Preheat the grill (with the lid open) for around
10 minutes at full power, before placing food
on the cooking grill. This gives a better result, and
cuts grilling time.
8
After completion of preheating, turn control
knobs to the lowest position, for best cooking
result.
24