M ET E K
M ic r o R a i n R a d a r M R R - 2
30
10.2010 Valid for MRR Service Version ≥ 5.2.0.9
Sub-Panel:
“Data Recording”
Disk capacity exhausted in
The remaining time for
data recording
is shown. The calculation is based on the average sizes of the last re-
ceived measuring protocol and the actual free disk space (Initially
???
ap-
pears
until the first data set is stored).
Time since last recording
The time elapsed, since the last aver-
aged and instantaneous data sets were written to disk, is shown (Initially
???
appears
until the first data set is stored).
Round time stamps to minutes
Time stamps are rounded to integer
values. This can be useful under the following condition: If the "Adjust
interval length to real time clock" (see chapter 6.2.2
) was selected, the time stamps should be integer multi-
ples of 10 seconds, minutes or ten minutes. Nevertheless small devia-
tions from these integers may occur due to variable processing time. If
this is disturbing for subsequent data analysis programs, the recorded
time stamps can be rounded. The selection
yes
or
no
is activated by
pressing the
ok
button.
Sub-
Panel “Errors”
This panel shows a list of errors which occurred during the measuring opera-
tion. Errors which occurred before the control program was started can be re-
trieved from the Windows® 2000- or Windows® XP-event log.
About Button
Figure 16: This panel appears after clicking the
About
-button