Metcalfe NS250HD, Инструкция по установке и эксплуатации

Страница: 12 / 20

11
Reassembly After Cleaning
Reassembling the sharpener
• Ensure the screw at the rear is loose (about
10 turns). Reposition the sharpener and turn
screw until tight
Reassembling the slice deflector
• Insert the slice deflector over pins and slide
back into position.
Reassembling the centre plate
• Insert the centre plate over the knife and
ensure that the flutes are flush with the flutes
on the fence plate.
• Insert the centre plate spindle completely and
rotate clockwise to secure.
Reassembling the table
• Insert the table on the carriage
• Tighten the table locking knob
•
Check that the table moves freely from left to
right
•
Check that the thickness selection knob works
correctly