9
Fitting Attachments
NOTE
: Install the bowl
BEFORE
attaching the mixing tool.
NOTE
: It is easier to install the attachment prior to adding ingredients into the
bowl.
Open the bowl guard and lower the bowl.
Slide the attachment slowly upwards onto the planetary shaft, fitting the shaft pin
through the slot in the attachment. (Figure A)
Rotate the attachment clockwise to secure it onto the planetary shaft.
NOTE
: Attachments should always rotate in a clockwise direction around the bowl.
If an attachment is moving counter-clockwise please contact a licensed electrician
immediately to remedy incorrect wiring.
Speed Selection
To change speeds, first turn off the mixer, then move the gear selector handle to the desired speed
before restarting the mixer by pressing the start button.
Number 1 is the slowest speed and number 3 is the highest speed.
Slow Speed
: for heavy mixtures such as bread dough, heavy batters, biscuits, potatoes etc.
Medium Speed
: for light dough which must rise quickly, heavy batters and some whipping operations.
High Speed
: for fast, light work, such as whipping cream, beating eggs, and mixing thin batters.
The speed selected depends largely on the quantity and consistency of the product. It is recommended
that mixing is always started at the lowest speed and progressively increased to the desired setting. In
an emergency situation always use the red emergency stop button to stop the mixer. The below table
show the recommended speeds for the range of tools.
1
st
Gear
2
nd
Gear
3
rd
Gear
Whisk
Beater
Dough Hook
Operation
•
Before you can start the machine, you will have to lift the bowl and close the safety guard.
•
Place the gear selector handle to desired gear.
•
Select time required if using timer.
•
Press on button to start the machine.
•
The machine must always be stopped before changing speeds. Failure to do so may damage the
gears or other parts and will void the warranty.
•
Never place your hand or any kitchen utensil in the bowl whilst the mixer is in operation.
•
Never operate this machine with safety covers removed or with safety switches inoperative.
•
When mixing is complete, turn off the machine and lower the bowl by lift handle/lever then take off
the attachment.
•
Then take out the bowl together with attachment.
•
Finally take out the mixed ingredients.
•
Please follow the capacity chart on the following page. Overloading or not following the chart will
damage the mixer and void the warranty.
(Figure A)
