36
Symbols
Denotes risk of personal
injury or damage to the
tool.
Read manual before use
Always wear hearing
protection
Always wear safety
goggles
Always wear protective
gloves
Keep hands away from
the cutting area while
the machine is running.
Danger of injury when
coming in contact with the
saw blade..
Danger area! Keep
hands, fingers or
arms away from this
area.
For your safety, remove
the chips and other small
pieces on the table before
starting work
In accordance with
essential applicable
safety standards of
European directives
Double insulated
speed
Blade Diameter
Cutting height max
ciculaire saw in fashion
Maximum cutting depth
miter saw in fashion
Dimensions of the tablet
ADDITIONAL SAFETY INSTRUCTIONS FOR
CROSS-CUT AND TABLE SAWS
_ Always wear eye protectors.
_ Never use the equipment in the presence of
flammable liquids or gases.
_ NEVER use the equipment when a cutting disc
(and not a saw disc) has been attached.
_ Before each use, check the saw blade for small
cracks or damages. Replace a cracked or
damaged blade immediately.
_ Never use saw blades made of high-speed steel
(HSS).
_ Only use saw blades that are recommended by
the manufacturer and that fulfil the EN847-1
standard. Also make sure the riving knife is not
thicker than the width of the saw cut, and
that it is not thinner than the body of the saw blade.
_ Always use the accessories that are
recommended by this manual.
_ Select the correct saw blade for the material must
be sawn.
_ To reduce the generation of noise, always make
sure that the blade is sharp and clean.
_ Only use correctly sharpened saw blades. Never
exceed the maximum speed that is
indicated on the saw blade.
_ Before installing the saw blade, clean the axle, the
flanges (especially the assembly
surfaces) and the hexagonal nut. Incorrect mounting
can lead to vibrations/knocking or
slipping of the saw blade.
_ Wherever possible, use the saw guard and the
riving knife with every type of application,
also when sawing material in two. Always mount the
saw guard according to the instructions
in this manual. Cutting operations are those where
the saw blade cuts completely through
the workpiece, such as for instance when doing
longitudinal cuts or shortening workpieces.
NEVER use the equipment with a defective saw
guard, and never tie up the saw guard with
a rope or cord. Every irregularity in the operation of
the saw guard must be immediately
_ Immediately replace the saw guard and the riving
knife, after a process has been completed
that required their removal.
_ Prevent that the saw comes into contact with
metals, such as nails and screws. Search for
and remove all nails, screws and other foreign
materials from the workpiece, before you
start to work.
_ Remove spanners, cut off pieces and the other
items from the saw table, before turning on
the switch.
_ NEVER wear gloves while working; the wearing of
gloves is only recommended while
cutting tools are being replaced.
_ Make sure that your hands stay clear of the
cutting line of the saw blade.
_ NEVER stand in the cutting line of the saw blade
and NEVER let anyone else stand in that
position.
