8 Notification Appliances—PA400 Electronic Mini-Sounders and PS12/24 Series Optional Strobes
To interconnect the PS12 and PS24 optional strobes to the PA400
sounder:
1.
Remove the two mounting screws from the sounder.
2.
Use a small screwdriver to punch out the skinned-over areas as
indicated in Figure 6.
3.
Install the adapter plate on top of the sounder, and screw the
combined sounder and adapter plate to the electrical outlet box.
Make sure field wiring terminals are oriented in the upward position
when mounted in the outlet box.
4.
Slide the strobe directly into the slots in the plates.
The positive solder lug may be colored red or marked with a
plus sign (+). This lug must be in the slot closest to the field wiring
terminals.
5.
Grasp the catch area on each end of the strobe, and squeeze while
applying inward force.
6.
Make sure the strobe catches fully engage the slots in the adapter
plate.
7.
Make sure the interface between the strobe and adapter plate is free of
gaps.
Figure 6: Mounting the PS12 or PS24 Strobe
PS12 or
PS24 Strobes
m inihrn
