pg. 6
metaphase-tech.com
Metaphase
Technologies
ULC-2
• Repeat the above steps for Channel 2. Scroll through the channels using the button located
on the ULC-2 front panel.
• IP Address- To change the IP Address, select IP Addr Octet from the menu. Using the up and
down arrow, scroll through each Octet 1-4 to change each segment of the IP address.
• Keypad Lock: To prevent changes to the ULC-2 controls, a lock button feature is included
• Keypad Unlock: When locked, press the
and buttons similtaneously and select YES to
enter the setup mode.
From there, scroll down to the Unlock Menu and select UNLOCK.
(A locked controller can also be unlocked via MetaBOSS). A setting of unlocked is default
4. Exit the Setup Menus to enter the Run-time Menus.
5. Disconnect power to the ULC-2 device and connect an external LED load.
6. Re-apply power to the ULC-2. Set the DC Current, DC Voltage, and Strobe to application/light
preferences.
M
C
