Metallwarenfabrik Gemmingen Eisemann T 18000 E, Руководство по эксплуатации

Страница: 56 / 132

Safety Guidelines
12

During maintenance and repair work, always tighten loose bolt connections! Main-
tain the required torque.

If the removal of safety devices is necessary for setup, servicing and repair, the
safety devices must be inspected and verified immediately after completion of the
maintenance and repair work.

Provide for the secure and environmentally safe disposal of operating and auxiliary
materials as well as replacement parts!
0.6 Instructions for particular risk types
0.6.1 Electric power

Only use original fuses with the prescribed current!
In case of malfunction in the electric power supply, immediately turn off the ma-
chinery/equipment!

Work on electrical installations or equipment may only be performed by a qualified
electrician or trained persons under the direction and supervision of an electrician
in accordance with electrical engineering
regulations.

Machinery and equipment parts on which inspection, maintenance and repair work
is performed must – if necessary – have their voltage switched off. The switched
off parts should be checked to make sure there is no voltage going to them and
then short-circuited parts as well as live parts adjacent to them should be insu-
lated!

The electrical setup of the machinery/equipment should be checked regularly. De-
fects such as loose connections or scorched cables must be fixed immediately.

When it is necessary to work on live parts, a second person should be involved
who in an emergency will press the emergency stop or the main switch voltage re-
lease. The work area should be roped off with a safety chain and a warning sign.
Only use voltage-insulated tools!

When working on high voltage components, after unlocking the voltage, connect
the supply cable to the ground and short circuit the components such as capacitors
with a grounding rod!