12
RBM E | Version 1.07
Description of the machine
5.3 Storage
The machine must be thoroughly cleaned before storing it in a dry, clean, dust-
and frost-free environment. It must not be shut down with chemicals in a room.
If the machine must be stored in a damp room, all electrical components in the
control cabinet as well as the hydraulic system must be protected by moisture-
absorbing agents. If the machine is stored for a long time, all bare metal parts
must be greased against rusting.
6
Description of the machine
Illustrations in this operating manual serve the general understanding
and may deviate from the actual design.
Fig. 6: Description of the RBM E
Pedal
The standard pedal is equipped with an EMERGENCY STOP button, which
immediately interrupts all machine movements when disconnected from the
power connection until it is released.
Function:
right pedal: turn right,
left pedal: direction of rotation left
6.1 Specification and standard equipment
- Asymmetric 3-roller system with swing-out top roller
- Two rollers driven by gears
- Hardened rollers (ST 1050 high-pressure steel)
- Cast iron frame
- Mobile control panel
- Conical-bender
- Operating manual
- EU standard according to (CE mark)
1 Compensating screw for top roller
2 Top rollers fold out
3 Bottom roller
4 Hand crank for height adjustment
5 EMERGENCY STOP button
6 Electric box with main switch
7 Pedals:
right pedal rotation right,
left pedal turning left
8 Anchoring point
9 Safety line
