15
Safety Strap
To use the safety strap, thread one ring
through the other around the top beam of
the tower, then pull to tighten up. The end of
the strap closest to the links must be on the
beam. At the end that is free, a carabiner
must be hooked and it must go through the
Grab Bar and fasten it to one of the
adjustment straps that the safety strap has,
according to the need stipulated by the
instructor.
Handles
To be used, each strap must be attached to
the spring through its half-ring and the
carabiner that is on the spring. They are
accessories that allow the use individually or
in pairs.
!
BEFORE EACH EXERCISE, MAKE SURE THE VELCRO ON THE HANDLES (IF FITTED)
IS FULLY FIXED. IF THE STRAPS ARE WORN OUT, REPLACE THEM IMMEDIATELY.
!
IF TWO HANDLES ARE USED SIMULTANEOUSLY, BE CAREFUL TO USE SPRINGS
OF THE SAME COLOUR (TENSION) AND PLACE THEM IN EYEBOLTS OF THE
SAME HEIGHT.
